Iso Din Radio Provision - Metra INST-7898 Instrucciones De Instalación

For the Honda Accord 1998-2002
/ Odyssey 1999-2002 follow
the next (6) steps. For all other
applications skip to All Other
Models:
1. Secure the radio brackets to radio
housing (a) using (4) #8 X 3/4"
screws Phillips pan head screws
provided.
2. Attach the ISO spacers onto the
sides of the radio brackets, and
snap trim plate (a) into the radio
housing. (Figure A)
(Figure A)
Kit Assembly

ISO DIN radio provision

3. Remove the metal DIN sleeve and
trim ring from the aftermarket
radio.
4. Slide the radio into the assembly
and align the holes in the radio,
with the holes in the ISO spacers.
Secure with screws supplied with
the radio.
5. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Test the
radio for proper operation.
6. Reassemble the dash
in reverse order of
disassembly.
®
INST-7898
All other models:
1. Snap trim plate (a) into radio housing (a).
(Figure A)
Note: For the Honda Civic 2001-2005 (non
"si" model), use Radio Housing (b), and
trim plate (b) instead.
2. Secure ISO brackets (a) to the radio
housing with (4) #8 x 3/8" Philips pan
head screws supplied. (Figure A)
3. Remove the metal DIN sleeve and trim
ring from the aftermarket radio
4. Slide the radio into the assembly and align
the holes in the radio, with the holes in
the radio brackets. Secure with screws
supplied with the radio. (Figure A)
(Figure A)
15
5. Locate the factory wiring harness in the
dash. Metra recommends using the proper
mating adapter from Metra or AXXESS.
Test the radio for proper operation.
6. Reassemble the dash in reverse order of
disassembly.
**For the Honda Accord 1994-1997 and
Acura CL 1997-1999:
Mount rear support bracket (b) to the rear
support provision with (2) bolts previously
removed in the dash disassembly. (Figure B)
**For the Acura RSX 2002-2006:
Mount rear support bracket (a) to the rear
support provision with (2) #8 x ¾" Phillips
pan head screws included. (Figure B)
(Figure B)