Dash Disassembly; Acura Cl 1997-1999; Integra 1990-1993; Integra 1994-2001 - Metra INST-7898 Instrucciones De Instalación

Acura CL 1997-1999

1. Unclip the radio trim
bezel and disconnect
the clock and climate
control wiring.
(Figure A)
2. Remove (2) 8mm
hex head screws
securing the factory
radio and disconnect
the wiring.
3. Cut and remove all
(Figure A)
of the mounting clips
on Radio Housing (a)
EXCEPT clips "A" and
"H" (the clips can
be identified by the
stamped letter near
each clip). (Figure B)
4. Mount the rear
"H"
support bracket (a)
to the back of Radio
Housing (b) with (2)
#8 x 3/8" Phillips pan
head screws supplied.
(Figure B)
(Figure B)
Continue to kit
assembly

Dash Disassembly

Acura Integra 1990-1993
1. Remove (3) screws
from each side of the
center console and
remove the console.
2. Remove (2) screws
securing the factory
radio to the sub-dash
support bracket. Slide
the radio/pocket
assembly out and
disconnect the wiring.
(Figure A)
3. Cut and remove all
"A"
of the mounting clips
on Radio Housing (a)
EXCEPT clips "C" and
"H" (the clips can
be identified by the
stamped letter near
each clip). (Figure B)
"H"
Continue to kit
assembly
®
INST-7898
(Figure A)
"C"
"C"
"H"
"H"
(Figure B)
3
Acura Integra 1994-2001
1. Remove the cover cap located under the
emergency brake and remove (2) screws exposed.
2. Remove (2) screws from the rear corners of the
lower dash trim bezel and remove.
3. Remove the ashtray and (2) screws exposed.
4. Unsnap the ashtray housing and disconnect the
cigarette lighter harness.
5. Remove the gear shifter knob and unsnap the
shifter trim.
Continue on next page
(Figure A)