Accord 1990-1993; Accord 1994-1997 - Metra INST-7898 Instrucciones De Instalación

Honda Accord 1990-1993
1. Remove (4) screws from the lower
portion of the center console.
(Figure A)
2. Remove the gear shifter knob and lift
the console out. Remove the ashtray
and ashtray bracket .
3. Remove (2) screws from the bottom
of the radio support, slide the radio
out and disconnect the wiring.
(Figure A)
Dash Disassembly
4. Cut and remove all of the mounting
clips on Radio Housing (a) EXCEPT
clips "C" and "H" (the clips can be
identified by the stamped letter near
each clip). (Figure B)
Continue to kit assembly
"C"
"C"
"H"
"H"
(Figure B)
®
INST-7898
Honda Accord 1994-1997
1. Remove the ashtray and (1) 3/4" #8
Phillips screw exposed. Open the
storage compartment and remove
(2) #8 Phillips screws exposed.
2. Remove the cup holder tray and (3)
#8 Phillips screws inside.
3. Lift the center console out and
remove (2) Phillips screws exposed
at the base of the dash trim bezel.
4. Unclip the bezel and remove.
5. Remove (2) hex head screws
(Figure A)
6
securing the factory radio and
disconnect the wiring. (Figure A)
6. Cut and remove all of the mounting
clips on Radio Housing (a) EXCEPT
clips "A" and "H" (the clips can be
identified by the stamped letter near
each clip). (Figure B)
7. Mount the rear support bracket (a)
to the back of the Radio Housing (a)
with (2) #8 x 3/8" Phillips pan head
screws supplied.
Continue to kit assembly
"A"
"C"
"C"
"H"
"H"
"H"
"H"
(Figure B)