1. Remove (2) Phillips screws from the
bottom edge of the glove box door
and remove the door.
2. Remove (3) Phillips screws from the
lower steering column panel.
3. Pull straight down on the lower
steering column panel and remove
the panel.
4. Remove (2) Phillips screws under
the climate controls.
5. Remove (4) Phillips screws from the
lower dash location. (Figure A)
6. Remove (4) Phillips screws securing
the bottom of the dash trim bezel/
radio assembly and pull the
assembly out as far as possible.
Dash Disassembly
Honda Civic 1999-2000
7. Cut the zip ties securing the radio
and climate control wires, slide the
dash trim bezel/radio assembly from
the dash cavity and disconnect the
wiring.
8. Cut and remove all of the mounting
clips on Radio Housing (a) EXCEPT
clips "B" and "H" (the clips can be
identified by the stamped letter near
each clip). (Figure B)
Continue to kit assembly
®
INST-7898
(Figure A)
8
"B"
"B"
"H"
"H"
(Figure B)