Tl 1996-1998; Vigor 1992-1994 - Metra INST-7898 Instrucciones De Instalación

Acura RSX 2002-2005
(except "S" model)
remove (4) Phillips screws securing
the pocket to the bracket assembly
and remove). (Figure A)
5. Cut and remove the all mounting
clips on Radio Housing (a) EXCEPT
clips "J" (the clips can be identified
by the stamped letter near each clip).
(Figure B)
6. Mount the rear support bracket (b) to
the back of Radio Housing (a) with (2)
#8 x 3/8" Phillips pan head screws
supplied.
Continue to kit assembly
"J"
"J"
(Figure B)
INST-7898
Dash Disassembly
Acura TL 1996-1998
1. Using a small
screwdriver, unclip the
perimeter of the radio
trim bezel. (Figure A)
2. Disconnect the climate
5. Disconnect the wiring.
control and rear
6. Cut and remove all
defroster wiring and
remove the bezel.
3. Remove (4) Phillips
screws securing the
factory radio/trim bezel
assembly. (Figure A)
4. Loosen (2) Phillips
screws securing the
back of the radio to the
Continue to kit assembly
metal housing and slide
(Figure A) (Figure B)
®
the radio out (it is not
1. Remove the access cap from
necessary to remove
the climate control cluster and
the screws securing the
(1) screw exposed. (Figure A)
metal).
2. Unclip the cluster and remove
(2) screws exposed. (Figure A)
3. Remove the ashtray and (2)
of the mounting clips Phillips screws exposed.
on Radio Housing (a)
4. Remove the cover caps
EXCEPT clips "B" and
from each front corner of
"K" (the clips can
the center console and the
be identified by the
screws exposed.
stamped letter near
5. Open the storage
each clip). (Figure B)
compartment, lift up the
carpet and remove (2)
screws exposed.
"B"
"B"
"K"
"K"
(Figure A)
5
Acura Vigor 1992-1996
6. Lift up on the center
console and remove. Unclip
the radio trim bezel and
disconnect the wiring.
7. Remove (2) bolts from the
back of the factory radio
and disconnect the wiring.
8. Cut and remove all of the
mounting clips on Radio
Housing (a) EXCEPT clips
"A" and "H" (the clips can
be identified by the stamped
letter near each clip). (Figure B)
Continue to kit assembly
"H"
(Figure B)
"A"
"A"
"H"