Stopping The Tractor - GOLDONI 30HST Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 96
Wheel
33.12.50x15"
36.13.50x15"
260/70x20"
12.4x20"

4.6 STOPPING THE TRACTOR

a) Release the forward (n.7 fig.1) or reverse (n.8 fig.1) drive pedal. If the speed
range lever (n.9 fig.1) was used, move it back to neutral (all the way forward).
b) Set the hand throttle to minimum by pushing lever n.11 fig.1 all the way
forward.
c) Pull up the parking brake lever n.13 fig.1
NB
If the tractor has to be stopped quickly, this can be done by pushing the forced
gear reset pedal (n.10 fig.1) all the way down. This can be done with the speed
range lever (n.9 fig.1) engaged.
The range lever (n.10 fig.1) will automatic reset to its neutral position when the
same pedal n.10 fig.1 is depressed.
WARNING: During work pauses or whenever the driver has to
leave the tractor, the engine must be switched off!
SPEED CHART'
In Km/h - with engine at 2800 Rpm
(speeds are purely indicative)
Creep
Creep
Middle
Fast
Reverse
Creep
Middle
Fast
Reverse
Creep
Media
Fast
Reverse
Creep
Middle
Fast
Reverse
78
Speed
from 0 to 6.04
from 0 to 12.55
from 0 to 20.76
from 0 to 11.73
from 0 to 6.43
from 0 to 13.34
from 0 to 22.06
from 0 to 12.46
from 0 to 6.52
from 0 to 13.53
from 0 to 22.38
from 0 to 14.18
from 0 to 7.16
from 0 to 14.86
from 0 to 24.58
from 0 to 15.61

Publicidad

Tabla de contenido
loading

Tabla de contenido