Installing The Battery - STOCKade IMPULSE ST-315i Manual Del Usuario

THE BATTERY AND CHARGING SYSTEM

INSTALLING THE BATTERY

on the right with the clip faceing out.
The battery has two positions in the tool:
•
To operate the tool be sure the battery is
•
fully inserted into the tool. After installing
the battery, note the LED light on the right
side of the handle.
If the light flashes red, the battery requires
charging.
If the light is solid green and the fan is running,
the tool is ready to take the next shot.
If the light fis solid red, and the fan is not on
the battery need to be recharged.
If the tool will not be used for a short period
of time, click the battery back into the "OFF"
position. This will prevent the tool from being
fired.
If the tool will not be used for extended periods
of time, remove the battery and store in the tool
case.
THE BATTERY AND CHARGING SYSTEM
8
#1
NOTE: OFF position
shown in small window
#2
NOTE:
Battery fully inserted into tool
#3
NOTE: LED Light
OFF
RUN