KS RONDA N Manual De Instalación Y Funcionamiento página 5

fAucEt INStAllAtION
StEP 2 - cONNEctING thE WAtER SuPPly
Fit the flexible pipe coming from
the faucet base to the solenoid
valve housing. Fit the water
supply inlet to the adapter at the
1
solenoid valve housing.
Inlet and outlet should follow the
indicating arrow on the solenoid
housing.
NOTE: Make sure the filter is located between the solenoid housing and the
water inlet.
Connect the cable coming from
2
the electronic unit to the solenoid
valve.
IMPORTANT: This product includes a self adjusting sensor.
The ideal sensor range for the specific location will be set automatically.
OBJECT
Before proceeding, check that no
objects are in front of the sensor
besides the washbasin.
6
RONDA N
FROM THE ELECTRONIC uNIT
TO THE SOLENOID VALVE
Now, remove the protective
sticker that covers the sensor.
fAucEt INStAllAtION
StEP 3 – cONNEctING thE POWER SOuRcE
for battery powered model: Connect the
1a
other cable coming from the electronic
unit at the faucet base to the battery box.
for transformer powered model: Connect
the other cable coming from the electronic
1b
unit at the faucet base to the transformer.
Plug the transformer into the electricity
socket.
After you have connected the power
source (battery or transformer) wait
15 seconds in order to allow the system
to set the ideal sensor range. As an
indication that the self adjusting is taking
2 place, a LED in the sensor eye will flash
continuously.
the solenoid valve will be opened and
closed for 1 second as an indication that
the ideal sensor range is set and the
product is ready for use.
Turn on the central water supply. Check
3
for leaks.
NOtE: This model includes a special aerator that
allows you to adjust the water stream direction
on site in order to prevent water splashing if
needed. To change the angle of the water stream,
simply move the adjustable tilting plate by
pressing it smoothly.
AttENtION! the aerator is tightened to prevent
removal by hand.
If the automatically adjusted sensor range is not satisfactory to your purpos-
es, please refer to the section entitled "Settings adjustment" .
RONDA N
FROM THE ELECTRONIC uNIT
TO THE POWER SuPPLY
ABOuT
15
SECONDS
7