tormatic STS T2E Instrucciones Para La Instalación página 8

Safety recommendations
• The manufacturer's instructions must be strictly observed.
• The installer must check the installation and the proper functioning of
the appliance.
• The product must not be used incorrectly or for purposes other than those
envisaged.
• Do not tamper with or modify the product.
• Always use original spare parts.
• Place barriers around the intervention area to prevent the access to
unauthorised people.
• Ensure that the working area is clear of obstacles and the floor is not
slippery.
• Use only tools in good condition.
• Do not work in environments not sufficiently lit or unsafe.
• Keep unauthorised people clear of the intervention area.
• Do not leave the intervention area unattended.
Purpose of the manual
This manual has been drawn up by the manufacturer and is integral part of
the product.
The information contained herein is addressed to expert operators charged
with the installation and the extraordinary maintenance. These operators must
have specific knowledge and must be able to perform all of the interventions
in a correct and safe way. The strict observance of these instructions grants
safe conditions, an efficient operation and a long life of the product. To prevent
operations that can result in accidents, read this manual thoroughly and obey
its instructions.
Application field
Device for TORMATIC operators to automate sliding gates.
Contents
1. DESCRIPTION
1.1 Block diagram of the device .................................................................4
1.2 Technical data .......................................................................................4
2. INSTALLATION
2.1 Preparation ...........................................................................................5
2.2 Assembly ..............................................................................................5
2.3 Electrical connections ...........................................................................5
3 OPERATION
3.1 Functioning tests ..................................................................................5
3.2 Trimmer adjustment ..............................................................................5
3.3 Operation programming .......................................................................6
4. FUNCTIONING CHECK
4.1 Functioning check of external devices ..................................................6
5. ACCESSORIES
5.1 Autoreverse card ..................................................................................6
5.2 Coded keypad .....................................................................................6
5.3 Badge reader .......................................................................................6