Description; Block Diagram Of The Device; Technical Data - tormatic STS T2E Instrucciones Para La Instalación

1. DESCRIPTION

STS T2E Device with TORMATIC microprocessor designed to drive one motor
with a maximum power of 680 Watt.

1.1 BLOCK DIAGRAM OF THE DEVICE

DL1 Power on led DL5 Additional safety/dead man input led
DL2 Start led DL6 Open limit switch led
DL3 Stop led DL7 Close limit switch led
DL4 Photocell led
K1 Mains power terminal board
K2 Signals/commands terminal board
K3 Connector for decoding badge reader and coded keypad / TORMATIC
radio receiver connector
J1 ADD/ON anti-crush card (AUTOREVERSE CARD) connector
P1 Pause time trimmer
P2 Brake intensity trimmer
P3 Torque adjustment trimmer
SW1 S1-4 Dip switches

1.2 TECHNICAL DATA

Voltage 230 VAC (+6% - 10%)
Frequency 50HZ
Fuse protection F1 F5A motor protection quick-acting fuse
Fuse protection F2 F200mA transformer primary circuit quick-acting fuse
Fuse protection F3 F500mA 24V accessories quick-acting fuse
Device stand-by consumption 15W
Device max. consumption 680W
Operating temperature -20°C +70°C
Storing temperature -40°C +85°C
Relative humidity 90% max. 90% (non-condensing)
Sealing IP55 (only for IP55 boxes)
ENGLISH
(with motors and accessories connected and functioning)
K3
ON
1 2 3 4
K2
1 2 3 4 5 6 7 8 9 10
Trimmer
trimmer adjustment
F3
C7
R2
K1
J1
11 12 13 14 15 16
DIP SWITCH positions
ON
OFF
F2
F1
4