melitta Calibra Instruciones De Uso página 10

Grind programme
3.1 Weight
3.2 No. of cups
3.3 Manual
table 2
7. Error messages in display
The bean container is empty. The quantity
in the container was less than the grind
quantity set. Fill the bean container and press
E01
the select button. This will cancel the error
message. By pressing the
grinding process continues and the remaining
grind quantity is added.
The bean container is not inserted correctly.
E02
Insert the bean container into the appliance
as described in point 5.
The motor has overheated due to being used
too much in a short time. To prevent further
damage to the appliance, the motor must
60
cool down for 60 minutes. The remaining
cooling time is shown in the display. Do not
disconnect the mains plug.
If T also appears in the display, press the Tare
button  to tare the scale. If the T is still
T
visible, the collecting container is not in the
correct position.
table 3
8. Notes on disposal
• Appliances marked with this symbol
to the European Directive for WEEE (Waste Elec-
trical and Electronic Equipment).
• E lectrical appliances should not be disposed of
with household waste. Dispose of the device in an
environmentally friendly manner using appropriate
disposal systems.
• P ackaging materials are raw materials and are recy-
clable. Please recycle them.
Preparation
Grind level
method
Pour Over 6 - 26
Cold Brew 6 - 26
Filter coffee 6 - 26
French Press 27 - 39
Espresso
button  the
are subject
Grind quantity
50 bis 60 g
100 g
6 to 8 g
8 g
Full portafilter
1 - 5
Water quantity
1000 ml
500 ml
GB
Per cup
Per cup
25 to 40 ml
10