Cleaning And Care; Technical Information - melitta Calibra Instruciones De Uso

between a minimum of 5 g and a maximum of 9 g per
cup. To do this press and hold the Selectbutton  .
In addition to
display. By pressing the
–
button , the desired grind quantity per cup
is set, this is stored when the select button is
released.
• I f T appears on the display, the tare weight on the
GB scale should be set. After pressing the Tare button ,
the T disappears and the preset number of cups
remains on the display (the collection container
must be correctly positioned on the stainless-steel
plate).
• W hen the button is pressed  the grinding
process starts.
• T he current number of cups flashes on the display
during the grinding process.
• A s soon as the preset number of cups is reached,
the grinder switches off. The grinding process can
be stopped at any time by pressing the
• T he last number of cups set and the grind quantity
per cup remain stored even after unplugging from
the mains power supply.
3.3 Setting to select the coffee
quantity manually
• In this setting, the scale is deactivated. The grind
quantity is determined by switching off manually.
• This setting is recommended to fill a portafilter.
• Press the Select button  until the
the symbol appear in the display.
• W hen the button is pressed  the grinding
process starts.
• When the required grind quantity is reached, press the
button  again.
• During the grinding process, the grind time in seconds
is shown on the display. The maximum grind time is
50 seconds.
4. Tips
• Only fill the bean container with the quantity of coffee
beans that you intend to use in the near future.
• The required grind quantity depends on the
coffee quantity and preparation method. Different
amounts are used for the different preparation
methods (table 2).
• Instead of the supplied collection container, it is
also possible to grind directly into a Melitta
filter (1x4, 1x2 and 102) . Many currently available
coffee filters can also be placed directly on the scale.
• Very dry ambient air and/or electrostatically charged
plastic filter holders can lead to the ground coffee
not falling completely into the collection container.
Ground coffee can fly around in an uncontrolled
manner and attach itself to the outer wall of the
machine. Moistening the coffee filter in the filter
holder beforehand  reduces this unavoidable
effect.

5. Cleaning and care

ATTENTION: Always disconnect the mains plug
before cleaning !
For the best coffee results, we recommend that you
clean the bean container, grinder and ground coffee
chute regularly. Clean when the grinder is completely
empty.
9
, the symbol also appears in the
+
button or the
button .
symbol and
®
• T he bean container can be removed from the
machine for cleaning. To do this, press and hold the
button at the bottom edge of the bean container 
in the open position . At the same time, turn the
bean container anti-clockwise until it stops and remove
it from the machine. Remove coffee residues from
the bean container with a soft, damp cloth
• T he outer grinder ring can be removed to clean
the grinding mechanism. To do this, lift the clamp
upwards  and unlock the grinder ring by turning it
anticlockwise. Remove the grinder ring .
• C lean the grinding mechanism with the supplied
brush . Remaining coffee residues can be shaken
out or removed using a vacuum cleaner.
• R eplace the grinder ring in the appliance and turn it
clockwise until it locks into place . It is completely
locked when the grinder ring can no longer be
pulled up and out.
• G round coffee residues on the ground coffee chute
and on the housing can be removed with the enclosed
brush and/or a soft, damp cloth
• T o insert the bean container, place it on the appliance
and turn clockwise until it clicks into place. In this
position, the markings on the housing and on the
bean container are vertically one above the
other . The coffee grinder can only be used if the
bean container is correctly inserted.
• T he collecting container, stainless steel plate and lid
of the bean container can be cleaned with a damp
cloth.
• N ever clean the coffee grinder and its removable
parts in the dishwasher.

6. Technical information

• T he appliance has an overload protection for the
grinding mechanism, this protects against damage by
foreign objects. If you hear a loud, rattling, previous-
ly unknown noise during the grinding process, press
the button  and clean the grinding mechanism
as described under point 5 "Cleaning and care".
• W hen the appliance is not in use it switches off
after 5 minutes. The last settings are saved auto-
matically. The appliance can be switched on again by
pressing any button.
coffee
.