Numark Total Control Inicio Rápido página 7

ROUTING AUDIO OUTPUTS IN CUE LE
When using a multi-channel audio interface with CUE LE, you will need to make sure that the Master Mix and the
Headphones Mix are being routed to two different sets of stereo outputs.
Click on the Config button in the top right corner
of the screen to access CUE LE's configuration
settings. You will see the window shown on the
right.
1. Select your audio interface's driver type
from the pull-down menu.
2. Then, select your audio interface from the
driver pull-down menu.
(Numark DJ|IO shown in illustration)
3. Select Headphones from the Outputs pull-
down menu.
4. Lastly, choose which outputs you would like
to use for your Master and Headphones
channels from the pull-down menu on the
bottom.
5. Click OK to exit the configuration settings.
ROUTING AUDIO OUTPUTS IN TRAKTOR 3 LE
When using a multi-channel audio interface with Traktor 3 LE, you will need to make sure that the Master Mix and the
Monitor Mix are being routed to two different sets of stereo outputs.
1. First, you need to select your multi-channel
audio interface to be used with Traktor 3
LE.
2. Click on Preferences, choose Audio
Setup and click on the Soundcard tab.
3. Next, select your multi-channel audio
interface in the Audio Device pull-down
menu on the right. (Numark DJ|IO shown in
illustration).
4. Then click on the Output Routing tab.
5. You can now set the audio outputs for you
Master and Monitor Mix channels. Please
select one pair of outputs for your Master
Mix, and a different pair of outputs
(headphones channel) for your Monitor
Mix. You will now be able to use the
Monitor channel to cue and monitor in your
headphones while you play.
3