Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Model BR30
6.4. Check-Weighing
6.4.1. About check-weighing
Check-weighing is a procedure to cause an alarm to sound when the weight on
the meets or exceeds values stored in memory. The memory hols values for a
high limit and a low limit.
Check mode OK (good):
When check range, the display will show OK and the beeper will sound when
the weight is between the limits.
Check mode NG (no good):
When check range, the display will show OK and the beeper will sound when
the weight is out of the limits.
6.4.2. Set limits
Press
and
or
, press
ve digit, use
enter the value, press
6.4.3. Set check weighing mode
Press
and
, press
(check mode NG),
to escape.
6.4.4. Note
Checkweighing function only available when weight more than 20d(min).
To disable the Check-Weighing function enter zero into both limits by pressing
the
key when the current limits are shown then pressing ZERO/TARE to
store the zero values.
Indicator
key together, it will display
key to enter, use
key to change value, use
key to sure, press
key together, it will display
key to enter, press
(no beep), press
, use
key to select
and
key to move acti-
key to clear value. After you
key to escape.
, use
key to select
key to select
(check mode OK),
key to sure, press
User's guide
key
39
Publicidad
Tabla de contenido
