HEINE DELTA 20 Plus Manual De Instrucciones página 10

Recommended separation distances for portable and mobile RF communication equipment and the EUT
The EUT is intended for use in the electromagnetic environment in which radiated RF disturbances are controlled. The customer or user of the EUT can help
prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communication equipment (transmitters) and the
EUT as recommended below, according to the maximum output power of the communications equipment.
Rated maximum output power
of transmitter (W)
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in metres (m) can be determined using the
equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter
manufacturer.
Note 1: At 80 MHz and 800 MHz, the higher frequency range applies.
Note 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects
and people.
Explanation of utilized symbols
The following symbols are used on the device or on the packaging:
The CE mark indicates that the product complies with the
European medical device directive 93/42/EEC.
REF Catalogue- or reference number
Serial number
SN
Manufacturer
Date of manufacture
Product bearing this symbol may not be disposed of together with
general household waste, but instead requires separate disposal
according to local provisions. (European Waste Electrical and
Electronic Equipment Directive, WEEE)
Temperature limits in °C for storage and transport
Temperature limits in °F for storage and transport
Humidity limitation for storage and transport
Pressure limitation for storage and transport
Type BF applied part
Follow instructions for use!
(Background: blue, foreground: white.)
Fragile, handle with care!
Keep dry
Interference may occur in the vicinity of equipment marked with
the following symbol
"Grüner Punkt" (country-specific)
10
Separation distance according to frequency of transmitter (m)
150 kHz to 80 MHz
d = 3,5/3 * SQRT (P)
0.1
0.4
1.2
3.7
11.7
80 MHz to 800 MHz
d = 3,5/3 * SQRT (P)
0.1
0.4
1.2
3.7
11.7
800 MHz to 2,5 GHz
d = 7/3 * SQRT (P)
0.2
0.7
2.3
7.4
23.3