Festo EasyPort USB Manual De Instrucciones página 119

6. Commissioning
© Festo Didactic GmbH & Co. KG „ 721876
14. The EasyPort demo application shows you that:
‟ Address 2 has been assigned to the connected EasyPort USB
module
‟ COM5 is being used as a serial port for communication
15. The green status LED at the EasyPort USB indicates that the
EasyPort USB has been correctly installed. The status LED flashes
twice briefly, thus indicating that address 2 has been assigned to
the EasyPort USB.
Note
If third party software with its own USB drivers is used, make sure
that at least one serial port is available for the EasyPort USB driver.
If the PC with the EasyPort's USB connection is shut down, the USB
cable should also be disconnected.
The USB cable should not be plugged in again until the PC and the
software, which communicates with the EasyPort USB, have been
restarted.
119