Installation Instructions; Assigning The As−Interface Address - Festo CPV GE-ASI-4E4A CE Serie Instrucciones Para El Usuario

3

Installation instructions

3.1 AS−Interface addresses
Before connecting to the AS−Interface bus: assign an unused
address to each slave. Set the address you require using
the AS−Interface addressing device. Permitted address
range: 1A/B
Address assignment
The diagram below shows the assignment of the data bits
to the inputs and outputs.
Data bits:
Inputs:
Outputs:
I/O = Bidirectional (B)
The address mapping depends on the configuration of the
master.
3.2 Assigning the AS−Interface address
Please note
Addressing of valve terminal type CPV...−GE−ASI−4E4A−...
is only permitted with addressing devices acc. to
specification 2.1 or higher.
Other addressing devices may overwrite the ID1 code.
Festo CPV...−GE−ASI−4E4A−...−CE
31A/B.
IO code 7
H
D0 D1 D2 D3
I/O I/O I/O I/O
I0 I1 I2 I3
O0 O1 O2 O3
0703NH
English
17