Reviewing Blood Glucose Day Average Results
2. Press Main button to review 14-, 21-, 28-, 60- and 90- day average
results stored in each measuring mode in the order of Gen, AC, then PC.
3. Exit the meter memory. Keep pressing the Main button and the meter
will turn off after displaying the last test result.
NOTE:
• Any time you wish to exit the memory, hold the Main button for 5 seconds or
leave the meter idle for 3 minutes. The meter will turn off automatically.
• Control solution results are NOT included in the day average.
• If there are no records in memory, --- displays when you recall the test results
or review the average results.
Data Transmission Via Bluetooth
You can transmit your data from the meter to your devices (e.g. smart
phone, tablet, PC...) via Bluetooth. Please contact your local customer
service or place of purchase for assistance. Please note that you must
1. Press and release Main button.
When
appears on the display,
keep pressing Main button for 3 seconds
until the flashing
Release Main button and then your 7-day
average result measured in general mode
will appear on the display.
(100 mg/dL = 5.6 mmol/L)
appears.
29