Fora TN'G Voice Manual Del Propietário página 30

complete the pairing between the meter and Bluetooth receiver before
transmitting data.
Pairing with your mobile device
1. Press and hold Bluetooth switch on the meter until Bluetooth indicator
starts to flash.
2. On your mobile device, turn on the Bluetooth function and follow the
instructions on your APP to pair the device (e.g., scan for meter to add
into APP).
3. After successfully pairing the APP to you meter, the Bluetooth function
on the meter will then start to transmit your data to your APP.
Bluetooth indicator on the meter
BLUETOOTH INDICATOR
Flashing Blue
Solid Blue
WARNING:
• While the meter is in transmission mode, it will be unable to perform a test.
• Make sure your iOS (6 or above) or Android system (4.3 or above) device
has its Bluetooth enabled and your meter is within receiving range before you
transmit data from your meter.
• A compatibility issue between your mobile device and the meter might occur
due to the way Bluetooth functionality is implemented by the various mobile
device manufacturers.
30
The Bluetooth function is enabled and waiting
for connection.
The Bluetooth connection is established.
STATUS