Maintenance; Battery Replacement; Cleaning And Storage - Promax PE-425 Manual De Instrucciones

USER'S MANUAL. PE-425

4. MAINTENANCE

4.1 Battery replacement

The Tester continuously monitors the battery voltage and indicates when the battery
need to be replaced.
The tester's batteries are situated under the tester.
ATTENTION: Disconnect all the test leads before opening the cover to change the
batteries.
1. Remove the battery cover and the batteries.
2. Replace with six 1.5 V R6 (AA) batteries, taking care to observe correct polarity.
3. Replace the battery cover.

4.2 Cleaning and Storage

WARNING: To avoid electrical shock or damage to the meter, do not get water inside
the case.
Periodically, wipe the case with a damp cloth and detergent; do not use abrasives
or solvents.
If meter is not to be used for periods longer than 60 days, remove the batteries and
store them separately.
05/2015 Page 15