EN
12.4
FUME CHAMBER CLEANING
Every 4/8 weeks the fume chamber cleaning must be executed.
• Unscrew the 2 fume chamber closing zincate panel screw which stands on under the door (see Fig. 29
page 76).
• Clean with a vacuum cleaner the ash which has accumulated on the inner (see Fig. 30 page 76).
• After the cleaning the opposite operation is to repeat checking the gasket efficiency and integrity: if
necessary provide for its replacement by an Authorized Technician.
12.5
FUME CONDUIT CLEANING
The exhaust system must be cleaned every month.
• Remove the inspection lid of the T-union (see Fig. 31 page 76).
• Extract the ash which has accumulated in the inner.
• After cleaning repeat the operation in reverse order, checking the condition and efficiency of the
gasket, and if necessary replace it.
76
The hand rejector can be removed exclusively by an authorized technician.
Fig. 29 - Fume chamber
Fig. 31 - Fume conduit cleaning
Fig. 30 - Fume chamber cleaning
RONDÓ - MIKA