Fume Passages Cleaning (Rondo' Model) - Cadel RONDO Manual De Instalación, Uso Y Manutención

• Remove the rear panel (see Fig. 35 page 77) and clean with a vacuum cleaner the ash and the dust
which has accumulated on the inner (see Fig. 36 page 77).
12.8

FUME PASSAGES CLEANING (RONDO' MODEL)

EN
Clean the fume passages every year.
Fig. 37 - Panels to remove
• Remove the 2 frontal panels (see Fig. 37 page 78 by unhooking them from its cogs (see Fig. 38 page
78).
• Fume passages placement (see Fig. 39 page 78).
Fig. 40 - Lids removal
• Unscrew the 2 fume chamber closing zincate panel screw (see Fig. 40 page 78).
• Clean the fume passages with the aid of a brush (see Fig. 41 page 78).
• Extract the ash which has accumulated in the inner (see Fig. 42 page 78).
• After the cleaning repeate the opposite operation checking the integrity and eficiency of the gasket: if
necessary have it replaced by an Autorized Technician.
78
Fig. 38 - Panels removal
Fig. 41 - Cleaning with a brush
Fig. 39 - Fume passages
Fig. 42 - Fume passages cleaning
RONDÓ - MIKA