Storage And Transport - Thuasne MultiComfort II G2 Manual De Utilización

The components of the THUASNE bed :
1. Foot part
2. Head part
3. Bed base head end
3. Bed base foot end
5. Hand control unit
optional:
6. wooden side rails MILANO
(including 4 gliders made of
plastics
7. Lifting pole
8. Triangle grip
not pictured:
•
Metal side rails PARIS
•
Transport and storing kit
•
Extension for the bed (10 cm, to a
maximum length of 220 cm)
2

Storage and transport

Because it is modular, the MultiComfort II G2 bed from Thuasne can easily be transported and stored.
Moreover, a transport kit ensures that the bed can be moved easily when it is no longer in use.
Assembly on the transport kit
The figure below will help you to follow the instructions :
1. Dismantle the bed (see chapter 6.6)
2. Assemble the head and foot of the bed on each side of the transport kit and tighten the winged bolts. The
transport kit is standing on its castors now.
3. Place both sections of the bed in the vertical tubes of the transport kit.
Your bed is now ready to be put away and transported. It can easily be moved by one person because of its
castors.
Ensure that the floor is flat, stable and horizontal when you transport the bed.
Fig. 2: Assembly on transport kit
(optional)
8
3
1
Fig. 1: overview
Please comply with the following
storage conditions :
- Temperature : ranging from - 10 °C to
+ 45 °C
- Humidity : from 40 % to 70 %
28
Fig. 3: bed on transport kit
(optional)
7
2
5
4
6