Eliminating Minor Faults Yourself - Gaggenau RC 280 Instrucciones De Uso

Eliminating minor faults yourself

Before you call customer service:
Please check whether you can eliminate the fault yourself based on the following information.
Customer service will charge you for advice – even if the appliance is still under guarantee!
Fault
Temperature differs greatly
from the set value.
The light does not work.
Fan does not run when the
door is open.
Appliance has no
refrigeration capacity.
Possible cause
The bulb is defective.
Light switch is jammed.
Not a fault, fan switches off
automatically when the door is opened.
▯
Appliance has been switched off.
▯
Power failure.
▯
The fuse has been switched off.
▯
The mains plug has not been
inserted properly.
Remedial action
In some cases it is adequate to switch off
the appliance for 5 minutes.
If the temperature is too high wait a few hours
and check whether the temperature has approached
the set value.
If the temperature is too low check the temperature
again the next day.
Replace bulb.
1. Switch the appliance off.
2. Pull out mains plug or switch off fuse.
3. Slide cover forwards and remove.
4. Change the bulb.
(Replacement bulb: 220–240 V a.c., E14 bulb
holder, see defective bulb for wattage.)
Check whether it can be moved.
Press main On/Off switch 1.
Check whether the power is on. Check the fuse.
27