Bright Starts InGenuity Guia De Inicio Rapido página 28

Slide the Power Switch to power the Swing Control Module.
EN
The Sway Speed function provides 3 speed settings and OFF. The LEDs
operate sequentially and in bar graph mode. To start the swing function,
press the button until the fl ashing LED bar graph displays the desired
setting. Then gently push the seat (within 15 seconds) to activate the swing
motion. After fi ve seconds, LED/LEDS will indicate the selected speed.
When you change the speed setting during swing motion, the LED bar
graph will fl ash for fi ve seconds during the speed adjustment. When the
swing timer expires, the swing stops and the Speed Selector and Timer
LEDs turn OFF.
Use the Swing Timer Select function to turn OFF the swing automatically.
Press the button to sequence to the desired timer setting of 30, 45, or
60 minutes. The three LEDs above the button indicate the selected time
period. If you do not select a timer setting (all LEDs are OFF), the unit uses
a default time of 90 minutes for auto-shutoff. To use the swing function
after auto-shutoff, either press the Swing Timer Select Button or the Speed
Selector Button.
Press the Nature Sounds/Music Button to begin music and nature sounds
playback. Press as needed to select the desired nature sound or song.
Auto-shutoff occurs after about 20 minutes.
Push the Volume Control Switch as needed to turn off or adjust the volume
for music and nature sounds.
Press the Vibration button to start the vibration function. Vibration calms
and soothes the baby. The vibration function automatically turns OFF in 30
minutes.
The Low Battery Detection function detects weak batteries and suspends
normal swing operation, music, and nature sounds. The Low Battery
Indicator turns ON (red) when you press a button during this condition.
To restore normal operation, replace all batteries with new alkaline size D
batteries.
– 28 –