4.4
Reagent Preparation
Bring all reagents and required number of strips to room temperature prior to use.
Standards
Reconstitute the lyophilized contents of each vial with 0.5 mL deionized water and let stand for at least 10 minutes at
room temperature. Mix several times before use.
Note: The reconstituted standards are stable for 6 weeks at 2 °C - 8 °C.
For longer storage freeze at -20 °C.
Controls
Reconstitute the lyophilized content each vial with 0.5 mL deionized water and let stand for at least 10 minutes at room
temperature. Mix the control several times before use.
Note: The reconstituted controls are stable for 6 weeks at 2 °C - 8 °C.
For longer storage freeze at -20 °C.
Wash Solution
Add deionized water to the 40X concentrated Wash Solution.
Dilute 30 mL of concentrated Wash Solution with 1170 mL deionized water to a final volume of 1200 mL.
The diluted Wash Solution is stable for 2 weeks at room temperature.
4.5
Disposal of the Kit
The disposal of the kit must be made according to the national regulations. Special information for this product is given in
the Safety Data Sheet, section 13.
4.6
Damaged Test Kits
In case of any severe damage to the test kit or components, DRG has to be informed in writing, at the latest, one week
after receiving the kit. Severely damaged single components should not be used for a test run. They have to be stored
until a final solution has been found. After this, they should be disposed according to the official regulations.
Version 10.0
2017/05 - vk
Leptin Sandwich ELISA EIA-2395
-
5 -