1. SAFETY INSTRUCTIONS
Important!
•
Please carefully read the user manual before installing or using this product.
•
If you are installing this product for someone else, remember to leave the manual or a copy of it with the end
user.
Warning:
•
The various items should only be disassembled by an authorised technician.
Safety measures:
•
For operation of this system in complete safety, it is essential that the installers, users, and technicians follow all of
the safety procedures described in this manual.
•
Specific warnings and warning symbols are given for items if necessary.
•
The product must be set up according to the applicable standards in the country where it is installed (NFC 15-
100 for France).
2. DESCRIPTION
1 •
Monitor
2 •
Wall bracket
3 •
Adapter plug
General
This videophone is composed of an interior response station with a screen and an exterior panel with an intercom
and camera, allowing the person inside to see and communicate with a visitor outside who rings the doorbell. The
system is easy to install, with only two wires needed for all functions: the doorbell, the video feed, the intercom, and
the strike plate and automated opening controls. For effective usage, please carefully read this instruction manual.
3. NOMENCLATURE
a. Monitor
(fig. 2)
1
4" colour screen
2
Microphone
Not during communication:
Intercom panel preview (surveillance
3
mode)
Out of Menu: left arrow or up arrow
During communication: Starts/
ends a call
In surveillance mode: initiates
4
communication
Menu: right arrow or down arrow
Screen off: Activates the touch keys
and access the time
Menu: OK (selection button)
5
View the camera: displays the time
setting and image settings
b. Intercom panel
(fig. 3)
1. IR LED for better visibility in the dark (light not visible to the naked eye).
2. C-MOS camera lens with automatic iris.
3. Speaker: allows the person inside to be heard outside.
4. Illuminated call button: when a person presses this button, the doorbell rings inside. The screen and the camera
turn on.
5. Light-up name holder (automatic name holder backlighting in response to light level). To change the label in the
holder, carefully lift the plastic protector using two fingers (8 fig. 4) and slide out the label in the holder.
(fig. 1)
4 •
Intercom panel and protective shield
EXTEL COMPACT - ADDCOMPACT
In call or surveillance mode:
6
Opens electric strike plate
In call or surveillance mode:
Opens dry contact (gate motor drive)
7
8
Loudspeaker
9
Power supply connectors
10
Slave or master button
Intercom panel and/or secondary
11
monitor communication connectors
GB2