Pratissoli MK2 Serie Manual De Uso Y Mantenimiento página 47

The pressure supplied by the pump is insufficient:
- The user flow (nozzle) is or has become greater
than the pump capacity.
- Insufficient revolutions per minute.
- Excessive leakage from the pressure seals.
- Imperfect functioning of the pressure control
valve.
- Worn valves.
Pump overheats:
- The pump is working in overpressure conditions
or pump rpm is higher than the nominal value.
- Oil in the pump casing is not at level or not the
recommended type as detailed in chapter 7
(see par. 7.6).
- Joint or pulley alignment is incorrect.
- Excessive pump tilt during operation.
Vibrations or hammering on pipes:
- Air suction.
- Faulty operation of pressure control valve.
- Valves malfunction.
- Non-uniformity of transmission motion.
47