iSi THERMO XPRESS WHIP Modo De Empleo página 29

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 73
English
▪ The preparation should be dispensed from the device as close as possible to the time of consumption.
Periodically clean the decorator tip and nozzle adapter during use (every 1 - 2 hours).
Regularly oil the charger holder thread (common oils such as sunflower or olive oil should be used).
SERVICE
Spare parts can be purchased individually at a low cost.
WARNING Do not carry out any alterations to the iSi Thermo XPress Whip.
▪ Contact your local dealer to order spare parts.
Always send in a complete device for repair (i.e. head and bottle).
STORAGE
If the iSi Thermo XPress Whip is not going to be used again immediately, allow the components to air
dry in a clean place (do not rub with a cloth). Store the iSi Thermo XPress Whip with all of the pieces
disassembled and only handle clean (disinfected) parts with clean hands.
NOTE: Observe valid food hygiene regulations.
29

Publicidad

Tabla de contenido
loading

Tabla de contenido