TDK relyon plasma piezobrush PZ3 Manual De Instruccion página 19

# Menu item/description
1 Start:
Device is booting and switches to the menu item
"Home" when ready
2 Home:
Overview: pressing the Start/Stop button starts or
stops the plasma activation
3 Process:
Selection of the various process tools
4 Timing:
Setting the duration for the selected process tool
5 Power:
Setting the plasma power
6 Plasma Error:
Set the behavior of the device when a plasma error
is detected.
"failure": device stops / red error
"warning": device does not stop / yellow warning
7 Buzzer Volume:
Setting the volume of the acoustic feedback
8 Display:
Setting the display orientation
9 Module Info:
Information about the currently inserted module
10 Info:
Information about the hardware and software
version of the device
11 Reset:
By holding the Start/Stop button for 5 seconds, all
device settings are reset to the factory settings
BA-PZ3_ML / F0354401
Settings Display
-
-
- Stopwatch
- Countdown
- Metronome
1s to 5min in
increments of 1s
30% to 100% in
increments of
5%
- failure
- warning
0 to 5 in
increments of 1
3 different
orientations
selectable
-
-
-
19