Deactivation Period; Automatic Return To Time Display; Manual Return To Time Display - PRG GT-ZSd-01 Manual De Operación

PROGRAMMING
When setting the day of the week, each push of the button DAY/SEC provides you with a
number of different selection possibilities.
• You enter a setting for a single day (for instance MO).
Or you can select one of the following combinations:
• Monday to Friday (MO, TU, WE, TH, FR)
• Monday to Saturday (MO, TU, WE, TH, FR, SA)
• Saturday and Sunday (SA, SU)
• All days of the week (MO, TU, WE, TH, FR, SA, SU).
3. Push the HRS button for setting the desired hour.
4. Push the MIN button for setting the desired minutes.
5. Push the PRG button for terminating the input of settings and switching to setting the
deactivation time.

Deactivation period

1. Push the DAY/SEC button for setting the desired day. PRG SET will be displayed on the
screen.
79
PROGRAMMING
2. Push the HRS button for setting the desired hour.
3. Then push the MIN button for setting the desired minutes.
4. Push on the PRG button, for terminating the input of settings and switching to the next
program location. Go on programming other activation and deactivation times, using the
same steps.

Automatic return to time display

If you do not push any other button for more than 1 minute during the programming pro-
cedure, then the device automatically returns to displaying the time. However, if the timer
program
is running, then the device returns to displaying the time only after a countdown.

Manual return to time display

Push the S/W button, whenever you want to return from any operating mode to the display
of the current time.
80