Error Correction; Technical Data; Conformity Declaration - PRG GT-ZSd-01 Manual De Operación

ERROR CORRECTION

Problem
The LCD display seems to be frozen. The
buttons do not react.
Programmed data are deleted, when the
timer switch is not inserted in the mains
socket.
Programmed ON/OFF times are not carried
out.
Programmed ON/OFF times are not carried
out at the desired (set) time.
Solution
Puch the RESET button, to return the device
to the factory settings.
Replace the batteries with a new set.
Check whether the deactivation function
has been switched off. Check whether the
connected equipment is switched on.
Check whether the random generator has
been switched on.
87

TECHNICAL DATA

Model: GT-ZSd-01
Mains voltage: 230 V~ 50 Hz
Switched load at 230 V: 16 A (ohmic load) / 3 A (inductive load)
Operating temperature: 0° - +40° C
Storage temperature: -20° - +60° C
Battery: 2 x LR 03 - Alkaline/R 03
Mains interrupt: Micro-interruption

CONFORMITY DECLARATION

The conformity of the product with the prescribed standards is guaranteed.
The complete conformity declaration can be found on the Internet at www.gt-support.de.
88