The Random Generator - PRG GT-ZSd-01 Manual De Operación

PROGRAMMING
1. Simultaneously push the PRG and the DAY/SEC buttons shortly, for switching to the timer
mode.
2. Then push the HRS button for setting the desired hour (1).
3. Push the MIN button for setting the desired minutes (10).
4. Push the DAY/SEC button for setting the desired seconds (30).
5. Then push on the ON/OFF button for selecting „ON".
6. Push the PRG button for saving your settings.
7. Start the timer with the CD button. When the timer has been activated, „CD" will be
blinking in the display. After 1 hour, 10 minutes and 30 seconds, the timer will switch off
the electricity supply to the external device.
The switching function can also be used the other way around, namely for switching off the
connected device at the set time, and turning on the device once more, when this period has
passed. Select the function „OFF" in step 5 for this purpose.
By pushing the CD button, you can also stop the timer.
83
PROGRAMMING
TIP
If the timer is stopped and restarted, the countdown starts from the beginning.

The random generator

The timer switch has an integrated random generator. A connected piece of equipment (for
instance a lamp) will automatically be switched on and off at random intervals. While the
time is being displayed on the screen, push the RANDOM button to start the random generator.
To switch off this function, simply push the RANDOM button once more.
TIP
When the random function has been activated, „RND" will blink on the display. All other
programs will not be operational.
84