Troubleshooting - Metra 99-5722 Instrucciones De Instalación

TROUBLESHOOTING

Resetting the interface
Option # 1
1. With everything connected and the car running.
2. Hold the bottom (2) buttons for 3 seconds, then release. (Figure A)
(The screen will turn black and then put you in the vehicle selection screen)
3. Select your vehicle and wait till the "SWC Configured " appears on the screen.
4. Turn ignition off and start vehicle, then test your interface.
(Figure A)
Option #2
1. With the vehicle running, press the Reset Vehicle Type button mentioned in System Configuration.
2. Refer to Programming, step 3, from this point.
17
REV. 10/27/2020 INST99-5722