Iso Ddin Radio Provision - Metra 99-5722 Instrucciones De Instalación

ISO DDIN radio provision

1. Cut and remove the center bar from the
radio/display trim panel.
(Figure A)
2. Attach the radio brackets to the inside
edge of the radio/display trim panel.
(Figure B)
3. Slide the radio into the bracket/panel
assembly and secure it using the screws
supplied with the radio. (Figure C)
4. Attach the ISO DDIN trim plate onto the
completed assembly. (Figure C)
Continue to Axxess
Interface Installation
KIT ASSEMBLY
Remove
shaded area
(Figure A) (Figure B) (Figure C)
REV. 10/27/2020 INST99-5722
7