Kit Assembly; Din Radio Provision With Pocket - Metra 99-5722 Instrucciones De Instalación

DIN radio provision with pocket

1. Snap the pocket into the lower opening
of the radio/display trim panel. (Figure A)
2. Remove the metal DIN sleeve from the
aftermarket radio.
3. Slide the sleeve into the upper opening
of the radio/display trim panel and
secure by bending the metal locking
tabs down. (Figure B)
4. Slide the radio back into the sleeve until
it clicks in. (Figure C)
Continue to Axxess
Interface Installation

KIT ASSEMBLY

(Figure A) (Figure B) (Figure C)
REV. 10/27/2020 INST99-5722
5