Bkw1/23 L-Gn - Hupfer Kohler BKW1/14 L-GN Manual De Instrucciones

Description and Technical Data
Appliance Description
3.4.3

BKW1/23 L-GN

Figure 3
1 Push bar
2 Door opener
3.4.4 Appliance Description
The banquet trolley is made of stainless steel and its surface is polished.
The appliance is equipped with a door on the front side. The removable support ledge frames are fitted on
the sides in the interior of the appliance to put the Gastronorm containers and/or grids.
The banquet trolley is equipped with two fixed and two lockable swivel casters with total brakes. The banquet
trolley is suitable for transport over carpets owing to a particular size of casters
fitted with special tyres.
The double-walled folding door is a thermal and sound insulation and you can swing it to an angle of 270°
and lock.
Two circumferential protective strips protect the appliance against damages when moving and transporting it.
The push bars of all the banquet trolleys (except BKW1/36 B-GN and BKW1/28 B-GN+10PK) move back-
wards with respect to the outer contour. This protects fingers sufficiently when holding the handles between
impact protection and push bars in such a way that there is no risk of injury when hitting, for instance, rough
walls.
The neutral banquet trolley BKW1/23 L-GN does not have a heating device.
Heated banquet trolleys (BKW1/14 L-GN, BKW1/20 L-GN and BKW1/36 B-GN) are equipped with a thermal
module with a circulating air blower and a water tank. This generates a uniform circulating stream of moist
hot air in the interior of the trolley that prevents food from drying out. Water in the water tank 25 oz (700 ml)
is sufficient for approx. 3,5 operating hours.
The operating temperature is to be set continuously by means of a rotary thermostat between 86°F (30°C)
and 203°F (95°C) . The temperature will be displayed on the display arranged on the door of the banquet
trolley. The circulating air blower runs independently of the heating during the complete operation.
The models BKW1/14 L-GN+5PK and BKW1/28 B-GN+10PK are equipped with an additional insulated
compartment above the heat area. This compartment can be equipped additionally with a cold storage plate
to be able to keep the temperature constant in the interior of the compartment for approx. 4 hours at approx.
39.2°F (4°C) when the ambient temperature is approx. 77°F (25°C) .
If it is intended to transport the banquet trolley by lorry, a transport securing device available at
can be used. This additional option must be indicated when ordering.
It is possible to fasten the appliance without causing any damage and transport it safely by lorry due to the
safety holders.
91101983_A3
View of the neutral banquet trolley
BKW1/14 L-GN | BKW1/20 L-GN | BKW1/36 B-GN | BKW1/14 L-GN+5PK | BKW1/28 B-GN+10PK | BKW1/23 L-GN
3 Swivel caster with total brake
4 Fixed caster
Chapter 3
Page 13
®
HUPFER
Banquet trolley heated | neutral