Publicidad
EN
UNCRATE THE MACHINE
When the machine is delivered, carefully inspect the shipping
carton and the machine for damage. If damage is evident,
save the shipping carton so that it can be inspected. Contact
the American Customer Service Department.
KNOW YOUR MACHINE
1 Operator Handle Grips
2 Switch Lever Safety Lock Button
3 Switch Levers - Squeeze - ON / Release - OFF
4 Handle Release Compression Lever
5 Power Cord
6 Operator Handle
7 Cord Hook
8 Skirt (RS-16 DC)
WARNING:
This machine contains moving parts. To reduce the
risk of injury, always unplug the power cord before servicing.
INSTALLING THE PAD DRIVER
1. Align the lugs with the corresponding slots in the pad driver and
turn the pad driver counterclockwise to lock it in place (figure 2). To
remove pad driver, give it a quick hard turn clockwise.
CAUTION!
Using the wrong pad on this machine can overload the motor.
2. Install skirt (RS-16 DC) as shown in figure 1, item 8; stiffening the
strip down.
Introduction
5
6
1
2
6
4
8
Figure 1
Lugs
LENGÜETAS
TENONS
Slots
RANURAS
FENTES
Figure 2
3
7
Publicidad
