Publicidad
Instructions for Connection to the Power Supply (230V)
CAUTION:
This machine will operate only on the AC frequency and electrical voltage shown on the nameplate.
Make sure you have the correct frequency and voltage before connecting the power cord to an outlet.
This machine must be connected to the electrical ground to protect the operator from electric shock. The machine has
a power cord with two main conductors and one earthing conductor. Connect the plug to the type of receptacle shown
in figure 5. The green and yellow conductor cord is the ground wire. Never connect this wire to any terminal other than
the ground terminal.
WARNING: Always use this machine with an AC three-conductor electrical system connected to the electrical ground.
Replace any worn, cut, or damaged cords. Peplace any damaged plugs, receptacles, or connector
bodies. Do not move the machine over an electrical cord. Always lift the cord over the machine.
Use only an approved extension cord with two main conductors and one earthing conductor.
WARNING: If you use an extension cord, use an extension cord with minimum wire size 1.55 mm2. Do not use an
extension cord longer than 15 meters. Do not join two extension cords.
WARNING: Do not cut, remove, or break the ground terminal. Do not try to fit a three-terminal plug into a receptacle or
connector body that does not fit the plug. If the receptacle or connector body does not fit the plug, see your Authorized
person to make the connection.
Extension Cords (230V)
8
Figure 5
Publicidad
