Battery Maintenance - Movement WIRE CROSS 45 Manual Del Usaurio

7
MAINTENANCE
CAUTION!

BATTERY MAINTENANCE

Replace the batteries when the display indicates that the battery has only 20% power. This percentage will be displayed during the
exercise interval. To know the percentage, touch the magnet on the counter. The two batteries must be replaced together.
Remove the batteries from the equipment if it is left unused for long periods of time.
Never store batteries in a place exposed to heat and humidity. This prevents leakage of its content.
The responsibility for properly collecting and transporting the batteries after use is from the Manufacturer. Therefore, the materials used
must be delivered to the establishments that marketed the product or to the Authorized Points, to transfer the waste to the
Manufacturers.
PULLEYS
The pulley is what allows the steel cable to do the necessary way to practice the exercise, so it is
extremely important to keep the pulleys well cared for. If there is any sign of wear or damage to
the pulleys, contact a technical assistance.
STEEL CABLE LOCKING PIN
The locking pin of the steel cable has the function of not letting the steel cable come out of the
pulley.
If any of the pins are damaged or loose, the steel cable may not be properly secured to the
sheave.
At the slightest sign of fault, contact Technical Assistance. Risk of serious or fatal accidents.
STEEL CABLE TENSIONER
Always check whether it is damaged or out of its standard shape. If you encounter any problem
with the tensioner contact Technical Assistance.
SELECTOR PIN
Always check that the selector pin is not damaged or out of its original form, so as to
compromise its functionality. If the pin is damaged contact Technical Assistance.
IN CASE THE SELECTOR PIN IS DAMAGED IT MAY NOT
HOLD THE WEIGHTS CORRECTLY, CAUSING SERIOUS OR
DANGER!
TOP PLATE
Allows the weights to be selected. At the slightest damage or wear do not try to select the
weight. Contact Technical Assistance to replace it.
WHEN REMOVING THE PANEL WITH COUNTER BE CAREFUL SO THAT THE WIRES DO
NOT RELEASE OR BREAK. WHEN REMOVING THE PANEL, BE CAREFUL NOT TO
FATAL ACCIDENT TO THE USER, IN ADDITION TO
DAMAGING THE EQUIPMENT
CRUSH THE WIRES.
35