Overheating Protection; Safety Information - UNITED OFFICE ULG 300 B1 Instrucciones De Uso

Lamination times
Pouch
size
DIN A4
DIN A3

Overheating protection

This appliance is fitted with overheating protection .
If the motor overheats due to overloading, the appliance switches itself off auto-
matically . In this case, disconnect the power cable and wait until the appliance
has cooled down to room temperature . You can then reconnect the plug to a
mains power socket and take the appliance back into use .
We recommend that you let the appliance cool down for about 30 minutes after
2 hours of operation .

Safety information

Check the appliance for visible external damage before use .
■
Never operate an appliance that is damaged . There is a
risk of electrocution .
All repairs must be carried out by authorised specialist
■
companies or by the customer service department . Improp-
er repairs can pose significant risks to the user . It will also
invalidate any warranty claims .
To avoid risks, arrange for a defective power cable to be re-
■
placed by qualified technicians or by our Customer Service
Department .
NEVER use the appliance with a defective power cable .
■
There is a risk of electrocution .
Do not use extension cables or power socket strips that do
■
not meet the required safety standards .
The mains power socket must be easily accessible, so that
■
the power cable can be easily disconnected in the event of
an emergency .
■ 20 │ GB │ IE
Pouch thickness switch e
position: 80 µm
approx . 54 s
approx . 75 s
Pouch thickness switch e
position: 125 µm
approx . 76 s
approx . 105 s
ULG 300 B1