EdilKamin MAXIMA 14 Instalación Uso Y Mantenimiento página 71

Pellet reserve tab
On this tab, you can view and manage the nominal autonomy
status of the boiler. To properly use this feature, once you've
added pellets to the hopper, set their quantity in the Set Load
fi eld and then press the Load kg button. When the button is
pressed, the Set Load value will be added to the Hopper Load.
You can change the Set Load value by pressing the plus/minus
buttons. The nominal pellet quantity determines the Reserve
Time automatically calculated by the boiler based on consump-
tion at current operating power. The Reserve Time indicates
the boiler's hours of autonomous operation before the pellets in
the hopper are totally consumed. The counter values displayed
on this page are only indicative.
When the boiler is using the reserve, in addition to an indica-
tion on the status bar, the icon in this tab will
change status: .
Buttons for
increasing/
decreasing Set
Load
Nominal
quantity of
pellets added
to the pressure
of Load kg
Alarm tab
This tab is normally not displayed. It appears when the boiler
is blocked. This screen displays the cause of the alarm (see the
section ALARM LIST at the end of the document). When the
boiler is blocked, it progressively switches off. When turned
off, you must press the
normal operating status.
INSTRUCTIONS FOR USE
Nominal quan-
tity of pellets in
the hopper
Residual
autonomy
Increases the
Hopper Load
counter by the
quantity in Set
Load
button to reset the boiler to its
Displays the
alarm status
Status icons
The status icons quickly communicate several alarm states or
important messages regarding operation of the boiler.
Alarm icon
No alarm present
Alarms present (the alarm tab is visible)
Economy function icon
Economy function disabled
Economy function: energy saving
Economy function:
USB drive present icon
USB drive not connected
USB drive connected
Time-slot programmer icon
Time-slot programmer deactivated
Time-slot programmer activated
Connection status icon
Communication with the boiler absent or defective
Communication with the boiler working
Comfort Clima status icon
Comfort Clima deactivated
Comfort Clima activated
Control buttons
The control buttons activate the functions of the boiler; enter
the menu and display the main operating statuses.
Start-up icon
Boiler not started. Touch to start.
Boiler started. Touch to turn off.
Season mode status icon
Summer season mode. Touch to enable winter season mode
Winter season mode. Touch to enable summer season mode
Icon for displaying the diagram (only with the optional microSD card inserted)
Touch to display the boiler's operating diagram
Icon for accessing the settings menu
Touch to access the boiler's settings menu
Icon for accessing the local settings menu
Touch to access the local settings menu
- 67
-