Product Description; Accessing The Unit - Oase BioMaster 250 Instrucciones De Uso

- EN -

PRODUCT DESCRIPTION

Scope of delivery
5 A BioMaster Thermo
1 BioMaster Thermo 250: HeatUp 150
BioMaster Thermo 350: HeatUp 200
BioMaster Thermo 600: HeatUp 300
2 Operating instructions HeatUp 25/50/75/100/
150/200/250/300
BioMaster, BioMaster Thermo
3 Operating instructions
BioMaster 250/350/600,
BioMaster Thermo 250/350/600
4 Holding ring for HeatUp assembly
5 Blind plug
6 Handle, when the handle is hinged down there are
two fasteners (10), locked
7 Unit head
8 Pre-filter with suction button
9 Connection unit with hose connectors, outlet and in-
let
10 Fastener
11 Container, filled with filter media
12 Rubber feet
5 B Suction unit, flow-out unit
1 Suction pipe
2 Hose
3 Flow-out pipe
4 Suction cup
5 Hose adapter, adjustable
6 Adapter, suction pipe
7 Suction basket
8 Terminal
9 Angle piece
10 Union nut
11 Short hose section as connecting piece
for flow-out pipes (3)
12 Water distributor
13 Cover cap
Intended use
BioMaster 250/350/600,
250/350/600, referred to as "unit", may only be used
as specified in the following:
· BioMaster 250/350/600: Water filtering and recir-
culation.
· BioMaster Thermo 250/350/600: Water heating,
filtering and recirculation.
· For operation with freshwater or saltwater.
· Operate in accordance with instructions. (→ Techni-
cal data)
20
Quantity
1
1
2
5
2
1
1
5
1
4
1
1
1
BioMaster Thermo
BioMaster 250/350/600, BioMaster Thermo 250/350/600
The following restrictions apply to the unit:
· Only use indoors and for aquaristic purposes in the
home (not for commercial use).
· Only operate with water at a water temperature of
+4 °C to +35 °C.
Function description
Drawn in by a pump in the unit head, the water first
flows through the pre-filter then from the bottom to
the top through the superimposed layers of filter me-
dia. The water then flows back into the aquarium via
the flow-out pipe or water distributor.
Foam filters with different pore densities, and Hel-X
bio-elements serve as filter media.
In units with heater, the water is heated during its pas-
sage through the filter system.

ACCESSING THE UNIT

N O T E
The following applies to all units with heater:
· Adhere to the rules for careful handling. (→ Careful
handling of the heater)
Careful handling of the heater
C A U T I O N
Hot surface!
Risk of burns when touching the glass bulb.
· Switch off the heater and allow it to cool down be-
fore removing it from the water.
C A U T I O N
Risk of breaking the glass!
The glass bulb of the heater can break and cause cuts.
· Take care when handling the heater.
· Allow the heater to cool down first. Do not immerse
it in cold water or pour cold water over it.