Channel Plans - Promax US TV EXPLORER 2 User Manual

Whenever the process detects new parameters for a channel or frequency will
create a new channel plan containing the detected information.
NOTE:
The icon in the upper corner of a digital measurement screen
states that the signal level is higher than the minimum threshold (see the
PREFERENCES menu) but demodulator cannot lock it maybe due to
some wrong configuration parameter.
In such case, the user must press AUTO ID
NOTE:
In the case that is desired to explore or identify DVB-C signals will be
necessary to select previously a DVB-C standard as digital signal identifier
by means of
In order to identify DVB-S2 signals will be necessary to activate previously
the DVB-S2 option for digital satellite signals in the
PREFERENCES menu.
5.9

Channel plans

The signal automatic identification process as much as the exploration of the
frequency spectrum could yield the generation of new customised channel plans
relative to the usual work locations of the meter equipment.
In this way the characterisation of the band will be faster and easier when causing
that the equipment only analyses a shorter set of channels.
Whenever a new process of exploration is activated, the US TV EXPLORER II
analyses all the present channels in the active channel plan, which acts as pattern
channel plan specified by means of the option CHANNEL SET from configuration
measurement menu: CONFIGURATION
Page 34
USER'S MANUAL. US TV EXPLORER II
[22] PREFERENCES menu.
[17].
[25 ] key.
[22]
10/2007