Promax US TV EXPLORER 2 User Manual página 46

10
0
-10
-20
FREQ:
REF:
TEST:
ATT:
Figure 13.- Attenuation Test. Terrestrial band.
In order to make the automatic acquisition of these measurements, select it from
UTILITIES menu by pressing the
DATALOGGER option, and later the NEW DATALOGGER option. In the CHANNEL
SET field will appear the type of test that the instrument is going to store automatically.
TEST POINT:
CHANNEL SET:
FREQ:
CH:
READY TO START
START
Figure 14.- Datalogger screen for Attenuation test frequencies.
Once the START option is selected the instrument will capture all test values
corresponding to the three pilot frequencies in the active band. When measuring is
completed, it will offer the options to store data or to start a new acquisition.
Page 38
USER'S MANUAL. US TV EXPLORER II
229.70 519.25 631.25
90.6 83.7 83.6
86.3 73.1 70.2
4.3 10.6 13.4
CALIBRATE
[22] key, and activating the RUN
PINEMALLCTR
PREMISE1
ATTENUATION TEST
229.70 MHz REF: - - -
- - - kHz LEVEL: - - -
SAVE EXIT
MHz
dBmV
dBmV
dB
EXIT
dBmV
dBmV
10/2007