Access To The Video Controls; Clearance And Ventilation; Video Card Requirements; Using The Standard Controls For The Video Card - 3M C3266PW Guia Del Usuario

10

Access to the Video Controls

The 3M Multi-Touch Chassis Display has seven buttons located on the side of the
display for the on-screen menu and adjusting the video display. Make sure you will
be able to access the video controls once the 3M Multi-Touch Chassis Display is
installed.
If space is tight and access is important, an on screen display remote control (Part No.
98-1100-0330-2) is an option (C4267PW, C4667PW, C5567PW, C6587PW only).

Clearance and Ventilation

Leave at least two inches of clearance space behind the 3M Multi-Touch Chassis
Display for proper ventilation. Units have vent holes at the top and bottom on the
back of the chassis -- ensure these holes are not blocked during installation. Always
maintain adequate ventilation to protect the display from overheating and to ensure
reliable and continued operation.
Note: Be sure to leave at least 2 inches clearance around fan inputs.
Refer to the published specifications for the maximum and minimum operating
temperature and humidity conditions. Refer to the product data sheet on the 3M
Touch Systems website at http://www.3m.com/touch/.

Video Card Requirements

Confirm your computer has a video card that supports the native video resolution of
1920 x 1080 for the 3M Multi-Touch Chassis Display. Mention something about the
C65 being 4K and that you will need to be able to drive higher resolution.

Using the Standard Controls for the Video Card

In addition to the standard controls on the display, each video card has several
controls that let you adjust the display settings. The software and driver for each
video card is unique. In most cases, you adjust these settings by using a program or
utility provided by the manufacturer of the video card.

Supported Video Display Modes and Refresh Rates

Your video card should support one of the display modes specified below. If you
select an unsupported mode, the display may stop working or display an
unsatisfactory image.
3M Touch Systems, Inc. Proprietary Information
TM
3M Multi-Touch Chassis Display User Guide