Troubleshooting; Tables: Malfunctions And Possible Causes - Amibot Spirit LASER Manual De Instrucciones

Troubleshooting

Please contact AMIBOT technical department in the following
cases:
• If the appliance has been dropped, damaged or come into
contact with water.
• If the power cable is damaged.
• If the battery is defective.

Tables: Malfunctions and possible causes

To avoid breakdowns/malfunctioning, regularly check and clean the
appliance accessories.
No. Error code
Main brush fault,
01 please clean the
main brush
Side brush fault,
02 please clean the
side brush
Wheel overload,
03 please clean the
wheel assembly
Front bumper
04 fault, please tap
the bumper
Cause
Problem with main brush.
The main brush is frozen.
Problem with
brushes. The side brushes
are dirty or frozen.
Problem with the castor.
The castor is frozen.
Problem with the
bumper. The bumper is
frozen.
29
Solution
Check the main brush and
remove any dust or objects
likely to be blocking it.
side Check the side brushes
and remove any elements
likely to be blocking them.
Check the castor and
remove any elements
likely to be blocking it.
Check the bumper.
EN