General Information - ECOFOREST ecoSMART e-system Manual Instalador

1. GENERAL INFORMATION

Thank you for purchasing our ecoSMART e-system.
This manual contains information about general performance of the system and how to
use the controller functions. The user can also find information on how to deal with
anomalous performance and some of the most common malfunctions that can be solved
without external assistance.
For best performance of the ecoSMART equipment and your ECOFOREST heat pump,
read this manual carefully before using. Keep this manual for future reference.
This manual contains two different kinds of warnings that should be heeded, as shown
below.
▪
Indicates a situation that may cause material damage or malfunctioning of the equipment. May
also be used to indicate practices which are recommended or not recommended for the
NOTE equipment.
▪
Warns of an imminent or potential danger situation that, if not avoided, can cause injury or even
death. It can also serve to alert of unsafe practices.
DANGER!
The ecoSMART e-system device has been designed to be used with ecoGEO, ecoGEO HP
and ecoAIR heat pumps range both in individual and cascade configurations, as well as
with a series of commercial devices present in self-consumption installations sized for
production and use of energy from renewable sources.
The manufacturer is not responsible for any material damage and/or personal injury
resulting from improper use or incorrect installation of the equipment.
The heat pump must be installed by a licensed installer in accordance with applicable
local regulations and in accordance with the instructions described in the installation
manual.
Installer manual ecoSMART e-system
47