Additional Safety Instructions; Service And Maintenance; Working Tools - Atlas Copco LH 11 Instrucciones De Seguridad Y De Funcionamiento

Safety and operating instructions
► Do not grab, hold or touch the inserted tool
when using the machine.
► Participate in health surveillance or monitoring,
medical exams, and training programs offered
by your employer and when required by law.
Note! See the "Noise and vibration declaration
statement" for the machine, including the
declared vibration values and "Additional
vibration information". It is found at the end
of these Safety and operating instructions.

Additional safety instructions

► Machines and accessories must only be used
for their intended purpose.
► Only qualified and trained persons may operate
or maintain the machine.
► Learn how the machine is switched off in the
event of an emergency.
► Release the start and stop device immediately in
all cases of power supply interruption.
► Always inspect the equipment prior to use. Do
not use the equipment if you suspect that it is
damaged.
► Always use your common sense and good
judgment.
► Pay attention and look at what you are doing.
► Do not use the machine when you are tired or
under the influence of drugs, alcohol or anything
else that may affect your vision, reactions or
judgment.
► Participate in safety and training courses.
► Never strike or abuse any equipment.
► Keep the machine and tools in a safe place, out
of the reach of children and locked up.
► Make sure that all the attached and related
equipment is properly maintained.
► Signs and stickers bearing important information
regarding personal safety and care of the
machine are supplied with every machine.
Make sure that the signs are always legible.
New signs and stickers can be ordered from the
spare parts list.
► Make sure that no unauthorized personnel
trespass into the working zone.
► Keep the workplace clean and free from foreign
objects.
► Never point a hydraulic hose at yourself or
anyone else.
10
www.CrowderSupply.com • Toll Free: 888-883-5144
© 2007 Atlas Copco Construction Tools AB
LH 11, 18, 19 E, 22, 23 E, 27, 28 E, 39, 40 E

Service and maintenance

Regular maintenance is a prerequisite for keeping
the machine safe and effective. Carefully follow the
operating instructions.
Before undertaking any maintenance or changing
the working tool on hydraulic machines, always
switch off the oil supply and bleed the machine
by depressing the start and stop device Then
disconnect the hydraulic hose from the machine.
► Use only authorized parts. Any damage or
malfunction caused by unauthorized parts will
not be covered by Warranty or Product Liability.
► Change damaged parts immediately.
► Replace worn components in good time.
► Always clean the hose couplings before
mounting or dismounting.
► Always plug hoses and nipples with clean and
tight plugs when dismounting.
► When cleaning mechanical parts with solvent,
make sure to comply with occupational health
and safety regulations, and make sure that there
is satisfactory ventilation.
Inspection and service on the accumulator must
►
only be done by a certified person.
► For major service to the machine, contact your
nearest authorized workshop.

Working tools

► Keep the tools clean and in good condition.
Regularly check the working tools, make sure
that they are sharp and not worn out.
Note! The machine can be destroyed if you use
incorrect working tools.
| |
No. 3392 5010 83 f 2007-03-06