Publicidad
STEP 1
3.
Insert drywall anchors
.
06
3A. Fold metal channel until it is flat with the plastic straps and slide the metal channel into the drilled hole
3B. Hold the plastic straps by the end and pull towards you until the metal channel is flush behind the drywall
3C. Slide the plastic cap down the straps and into the hole with the lip of the cap flush against the wall
3D. Bend the straps side to side until they snap off level with the lip of the cap
3A
3B
06
06
3C
3D
06
06
11
Publicidad
